Plantation window shutters are found across the United States, but most people have no idea about their basic components. While they come in different designs, the anatomy of every unit is practically similar to the next.
In this post, Wholesale Shutter Company sheds light on the primary parts of a typical plantation shutter:
Frames
These components surround the panels, shaping the profile of the entire unit. While they come in standard designs, you can get custom, decorative frames that will add more interest to the space.
Rails and Stiles
Just like in glazed doors, rails and stiles give shutters form, structure and stability. The former are categorized as top, mid and bottom rails depending on their location. Stiles perfectly flank louvers, allowing the slats to rotate smoothly between them.
Louvers
Wholesale Shutter Company agrees that these very slats bestow character on plantation shutters. Interior units are generally available in multiple sizes, giving you plenty of gap-height choices to better control ventilation and daylighting. On the other hand, exterior window shutters with louvers usually have two-and-a-half-inch slats, which can be fixed or slightly ajar.
Push Rod
This vertical piece is attached to each set of louvers, which makes it possible to effortlessly open or close the slats in unison. Also known as the tilt bar, it goes into the mouse hole, a small indentation on the rails, at closing.
Hinges
Unlike other window treatment products, shutters are hinged at the side to swing open. These pieces of hardware are customizable, too, coming in different stylish finishes to enhance your existing home decor.
Design your American-made plantation shutters your way. Discuss your ideas with Wholesale Shutter Company and seek guidance to put the right details together. Call us at (866) 540-0049 now to talk about your project and get a FREE estimate in Los Angeles or San Diego, CA.